Description
Hydraulic top bending roller, three rolls are powered
Runs on 230V-60HZ-3PHpower
Hardened rolls, various segment rolls for different types of flat bars, angle iron, square tube, etc.
Open-face design allows you to roll full circles
Horizontal and vertical use
Gear drive and 4.0 kW powerful motor make rolling easily
Optional toolings are available for round tubes and pipes.
Specifications
SKU | 191021 |
Model | HRBM65H |
Dia. of shaft | ø2.75″ |
Power | 4 kW/5HP |
Spindle speed | @60Hz 11 r/min |
Packing size | 48x43x74 inch |
N.W./G.W. | 1610/2006lbs |
Working capacity
Profile | Size (mm/in) | Min. Dia. (mm/in) |
Flat bar easy way |
120×25/4.7×0.98 50×10/1.96×0.39 |
600/23.6 400/15.7 |
Square solid bar |
35/1.37 20/0.78 |
550/21.6 400/15.7 |
Round solid bar |
ø35/1.37 ø20/0.78 |
550/21.6 400/15.7 |
Angle steel toe out |
70×6/2.7×0.23 40×5/1.5×0.19 |
500/21.6 400/15.7 |
Angle steel toe in |
70×6/2.7×0.23 40×5/1.5×0.19 |
600/23.6 500/21.6 |
T steel toe out |
80x40x7/3.15×1.57×0.27 40x40x5/1.5.×1.5×0.19 |
500/21.6 400/15.7 |
T-steel toe out |
80x40x7/3.15×1.57×0.27 40x40x5/1.5.×1.5×0.19 |
400/15.7 360/14.1 |
T-steel toe up |
80x40x7/3.15×1.57×0.27 40x40x5/1.5.×1.5×0.19 |
500/21.6 400/15.7 |
C-channel toe out |
100x50x5/3.9×1.9×0.19 50x40x5/1.9×1.57×0.19 |
550/21.6 500/21.6 |
C-channel toe in |
100x50x5/3.9×1.9×0.19 50x40x5/1.9×1.57×0.19 |
550/21.6 400/15.7 |
Square tube |
70x70x3/2.7×2.7×0.1 30x30x3/1.1×1.1×0.1 |
900/35.4 500/19.6 |
RHS X-X axis |
80x40x3/3.14×1.57×0.11 50x30x2/1.96×1.18×0.17 |
800/31.4 500/19.6 |
Profile Samples (only for the above chart, if not in the chart, may need extra dies)
Reviews
There are no reviews yet.